Home / Leather - Belt Loops / Shark Designs - 'Twist N' Pull' Leather Belt Loop

Shark Designs
'Twist N' Pull'
Leather Belt Loop

Shark Designs - 'Twist N' Pull' Leather Belt Loop Photo shows a brown Shark Designs - 'Twist N' Pull' Leather Belt Loop, attached to a '501' Leather Belt with Para Cord Lanyard & Quick Release Key Ring.
Shark Designs - 'Twist N' Pull' Leather Belt Loop Flat and Done Photo shows a tan Shark Designs - 'Twist N' Pull' Leather Belt Loop, ready to be assembled (Top) and assembled (Bottom).
  • Easy to Assemble (Takes less than a minute)
  • Fits all belts up to 1-1/2 inches (38mm).
  • Made from 3.5mm (+/-) Best Quality Veg Tanned Leather.

The Shark Designs - ‘Twist N’ Pull’ Leather Belt Loop is a high quality, handmade, Belt Loop that is ideal for anyone who wishes to securely fasten small, lightweight, items of equipment to their belt. This, unique design, simple Belt Loop, can easily be assembled in less than a minute (See below for clear-cut and simple to follow ‘Photo Instructions’), without the need for tools or sewing thread to make it. Yet, once assembled, it will never come undone or apart.

Leather Quality

These superb quality leather Belt Loops are specifically designed to fit our range of Casual and Professional leather belts, however, they can be just as easily fitted to any belt that is up to, and including, 1-1/2 inches wide. Our Leather Belt Loops are made from the finest quality 3.5mm (+/-) Vegetable Tanned Leather, so they can securely withstand many years of hard use.

The default colour for this Belt Loop is Brown, so if you would like your Belt Loop in other colour (i.e. Russet, Tan or Black) then please state your colour preference with your order.

PLEASE NOTE: The Leather '501' Belt, Para Cord and Quick Release Key Ring are not included in this sale.

Assembly Instructions

PLEASE NOTE: It is important that you read and understand these instructions before you attempt to assemble your Belt Loop since it is quite difficult to disassemble once assembled.

Belt loop assembly photo 1 Photo 1. Hold the Belt Loop so that the Shark Logo is on your left-hand side. (Click Photo to Enlarge)

Belt loop assembly photo 2 Photo 2. Turn the Belt Loop over so that you are looking at the back. (Click Photo to Enlarge)

Belt loop assembly photo 3 Photo 3. Bend the right-hand side end-tab over so that it is in line with the left-hand side slit-and-hole. (Click Photo to Enlarge)

Belt loop assembly photo 4 Photo 4. Slip the right-hand tab-end through the left-hand side slit-and-hole. This may be quite tight, so you may need to separate the sides of the slit-and-hole slightly so that it will accommodate the tab-end. (Click Photo to Enlarge)

Belt loop assembly photo 5 Photo 5. Pull the tab-end through the slit-and-hole until it locks into place. (Click Photo to Enlarge)

Belt loop assembly photo 7 Photo 6. Take the tab-end with the Shark Logo on it and slip it through the slit-and-hole that was originaly on the right-hand side (See Photo 1). This may be quite tight, so you may need to separate the sides of the slit-and-hole slightly. (Click Photo to Enlarge)

Belt loop assembly photo 7 Photo 7. Pull the tab-end through the slit-and-hole until it locks into place. (Click Photo to Enlarge)

Belt loop assembly photo 8 Photo 8. Gently squeeze and pull the belt loop sides, and tabs to align all of the holes and tidy up the overall appearance of the Belt Loop. (Click Photo to Enlarge)

Belt loop assembly photo 9 Photo 9. Squeeze the Belt Loop’s looped end to flatten it slightly this will make it easier to slip on your Belt. (Click Photo to Enlarge)

Belt loop assembly photo 10 Photo 10. The Belt Loop is now assembled and ready to be place on your belt. However, a quick buff with some boot polish will finish the overall look of the belt Loop. (Click Photo to Enlarge)

More information about our complete range of handmade classic leather belts can be found on our Bushcraft Articles and Tips section.

Home / Leather - Belt Loops / Shark Designs - 'Twist N' Pull' Leather Belt Loop